VSYS VPM-20-02L Telescopic Projector Ceiling Mount, 35 kg

The VSYS VPM-20-02L Telescopic Projector Ceiling Mount, 35 kg is the ideal solution when you want a projector hung at the right height without sourcing, cutting or threading a separate ceiling pipe. Everything is in one carton: a ceiling plate, a telescopic pole that extends from 735 mm to 1135 mm, and the adjustable head that carries the projector. That single decision removes the most common cause of delay on a projector install, because nobody is waiting on a plumber's merchant to supply pipe in the right length. With a 35 kg capacity, arms that open across a 130 mm to 470 mm spread and cabling routed inside the pole, it delivers a finished-looking installation that a two-person crew can complete in a single visit — tidy above the ceiling line, precise below it.

Key Features

• Self-Contained Telescopic Pole - Extends from 735 mm to 1135 mm, so there is no separate pipe to specify, order or cut to length.
• 400 mm of Height Adjustment - One part number covers rooms with noticeably different ceiling heights on the same project.
• 35 kg Load Rating - Handles mid-size and large commercial projector chassis with headroom for a later upgrade.
• Adjustable Arms, 130–470 mm Spread - Open or close the arms to land on almost any projector's mounting hole pattern.
• Tilt, Plus or Minus 20 Degrees - Corrects the vertical angle when the pole cannot sit exactly square to the screen.
• Swivel, Plus or Minus 8 Degrees - Fine horizontal trim to remove keystone before you touch the projector menu.
• Full 360 Degree Rotation - Turns from +180 to -180 degrees, so the image orientation is set by you, not by the ceiling fixing.
• Cable Management Through the Pole - Power and signal cables run inside the tube for a clean, concealed finish.
• Steel and Plastic Construction - Powder-coated in matte black or matte white to suit the ceiling it hangs from.
• Single-Visit Installation - Ceiling plate, pole and head arrive together, which shortens site time and simplifies procurement.

Where this mount earns its place is a multi-room rollout. A training centre with a 2.8 m suspended ceiling in one room and a 3.6 m slab in another can standardise on one self-contained telescopic pole and simply set each drop within the 735 mm to 1135 mm range on the day. The adjustable arms across a 130 to 470 mm spread mean a mixed fleet of projector models does not force a mixed fleet of brackets, and cable management through the pole keeps the finish consistent from room to room. Add plus or minus 20 degrees of tilt and full 360 degree rotation and the commissioning engineer can align the image geometrically instead of leaning on digital correction. Specify it for a university lecture theatre, or a hotel meeting suite where every room has to look identical.

Ideal for: offices, retail, hospitality and education across Dubai, Abu Dhabi, Sharjah and the GCC.