VSYS VPM-20-H Universal Projector Interface Bracket for 1.5" NPT Pipe, 35 kg

The VSYS VPM-20-H Universal Projector Interface Bracket for 1.5" NPT Pipe, 35 kg is the ideal solution when your ceiling pipework is already in place and what you actually need is the projector-side hardware to finish the job. This is an interface bracket, not a complete ceiling kit: it threads onto a standard 1.5" NPT ceiling pipe, and that pipe and its ceiling plate are not supplied. What you get is the part that does the precision work — adjustable arms that open and close to match almost any projector's hole pattern, a detachable mounting plate so the projector can come down for lamp or filter service and go back up on the same alignment, and a 130 mm to 470 mm adjustable drop that lets you clear beams, bulkheads and sprinkler heads. With 35 kg of capacity and full aiming control, it turns existing structural pipework into a properly aligned projector position.

Key Features

• Interface Bracket for Existing Pipework - Designed to complete an installation where the 1.5" NPT pipe and ceiling plate are already specified and supplied separately.
• 35 kg Load Rating - Comfortably covers the great majority of mid-size and large commercial projectors.
• Universal 1.5" NPT Thread - Mates with the standard pipe size used across most commercial ceiling projector infrastructure.
• Adjustable Mounting Arms - Extend and retract to fit a wide range of projector footprints, so one bracket covers a mixed fleet.
• Detachable Mounting Plate - Lift the projector off for maintenance and refit it without re-aiming the whole assembly.
• Tilt, Plus or Minus 20 Degrees - Enough vertical range to square the image on the screen from an off-centre pipe position.
• Swivel, Plus or Minus 8 Degrees - Fine horizontal correction for keystone-free alignment.
• Full 360 Degree Rotation - Rotates from +180 to -180 degrees, so the projector orientation is never dictated by where the pipe landed.
• Adjustable Drop, 130–470 mm - Sets the projector clear of ceiling obstructions while holding the throw distance you designed for.
• Steel and Plastic Build, Matte Black - A powder-coated finish that disappears against a dark ceiling void.
• Integrated Cable Management - Power and signal cables run tidily along the arms instead of hanging in the beam path.

The reason integrators reach for an interface bracket rather than a complete kit is control over the drop. In an auditorium or a house of worship the pipe length is set by the structure and the architect, and the bracket only has to handle the last half metre — which is exactly what the 130 to 470 mm adjustable drop, plus or minus 20 degrees of tilt and full 360 degree rotation are for. Because the detachable mounting plate preserves alignment through a service visit, facilities teams are not re-commissioning the image every time a filter is cleaned, and the 35 kg rating leaves headroom if the room is later upgraded to a brighter chassis. Plan it for a lecture theatre where the projector hangs from a long structural drop, or a cinema room where the pipe was set during fit-out.

Ideal for: offices, retail, hospitality and education across Dubai, Abu Dhabi, Sharjah and the GCC.