VSYS VS02SE-446 Full-Motion Wall Mount for 32"–75" Displays, 40 kg

The VSYS VS02SE-446 Full-Motion Wall Mount for 32"–75" Displays, 40 kg is built for the moment a room outgrows a basic articulating arm. It carries flat and curved panels from 32" up to 75" weighing as much as 40 kg, and it anchors on a dual-stud wall plate spanning 406 mm rather than a single fixing point, which is exactly what you want behind a larger screen that will be pulled out and pushed back several times a day. The arm travels from 67 mm folded to 355 mm extended, swivels 60 degrees to either side and tilts +3 to -15 degrees. A separate screen-levelling adjustment of plus or minus 3 degrees lets you correct any residual lean after the panel is hanging, so the picture sits true even when the wall behind it is not.

Key Features

• Dual-Stud Wall Plate - Spans two studs at 406 mm centres to spread the load of a bigger panel, and fixes just as happily to concrete or block.
• 40 kg Load Rating - Strength-tested to three times its rated capacity for confidence on a 75-inch screen.
• 32"–75" Screen Range - Sized for family rooms, open-plan offices and reception areas rather than desk-side monitors.
• 67 mm to 355 mm Reach - Sits close when parked, pulls well clear of the wall for corner and side-angle viewing.
• Swivel 60 Degrees Each Way - Turn the display toward a second desk cluster or a different seating group without moving furniture.
• Tilt +3 to -15 Degrees - A deeper downward angle than entry-level arms, useful when the screen sits above eye level.
• Plus or Minus 3 Degree Levelling - Independent post-installation adjustment that fixes a crooked picture in seconds.
• Steel and Reinforced Plastic - Steel where strength matters, engineered polymer where weight does not need to be.
• Integrated Cable Management - Keeps HDMI and power tidy across the arm's full travel.
• Hook-On Bubble Level - Supplied in the box so the plate goes up straight first time.

The dual-stud wall plate is the reason facilities managers keep coming back to this model. A full-motion arm applies leverage every time someone swings the screen, and a single-point fixing eventually tells you about it. Spreading that force across two studs, with the 40 kg load rating and a three-times safety test behind it, gives you an installation that still feels tight years later. Add the plus or minus 3 degree levelling and a snagging list item disappears: no more shimming, no more taking the panel down. Picture it in an open-plan office where one display serves two desk pods, or in a hotel lobby where a large screen has to angle toward the seating on demand.

Ideal for: offices, retail, hospitality and education across Dubai, Abu Dhabi, Sharjah and the GCC.