VSYS VCM-CE1046D-02 Double-Pole Ceiling Mount for 37"–80" Displays, 70 kg

The VSYS VCM-CE1046D-02 Double-Pole Ceiling Mount for 37"–80" Displays, 70 kg is the ideal solution when the wall is the wrong place for your screen and the ceiling is the only structure you can trust. Two telescopic poles share the load instead of one, which is why this mount is rated for a substantial 70 kg — a genuinely heavy-duty figure for a single-screen ceiling hang, and enough headroom for thick commercial panels rather than just consumer televisions. The pair of poles drops the display anywhere between 695 mm and 1565 mm below the slab, so you can bring a screen down to eye level in a high-ceilinged restaurant or keep it tight to the soffit in a low retail unit, all from the same part number. The display itself tilts from +3 to -20 degrees and swivels on a detachable VESA plate, so aiming is done at the screen, not at the ceiling. Solid where it needs to be, adjustable where it counts.

Key Features

• 70 kg Load Rating - Twin poles spread the weight, giving genuine capacity for large commercial panels rather than a nominal figure.
• Double-Pole Construction - The two-column design resists the twist and sway a single slim pole allows, keeping a heavy screen steady.
• Telescopic Drop, 695–1565 mm - An 870 mm adjustment window covers low soffits and high ceilings from one specification.
• Fits 37-Inch to 80-Inch Displays - One model spans small meeting-room screens through to large signage panels.
• Tilt +3 to -20 Degrees - Angles a high-mounted screen down toward the audience so the picture is not viewed edge-on.
• Swivel Adjustment - Rotates the panel to face the seating or the aisle without moving the ceiling fixing.
• Detachable VESA Plate - Bolt the plate to the display at floor level, then lift and hook it on — a far safer install than holding a screen overhead.
• VESA Up to 600x400 mm - Covers the mounting patterns used by the great majority of displays in this size class.
• Internal Cable Management - Power and signal cables run inside the poles, so nothing dangles below a ceiling-mounted screen.
• Powder-Coated Steel - Strength-tested steel with a hard-wearing black finish suited to permanent commercial installation.

Where the double-pole layout really pays off is in rooms with no usable wall behind the screen. Restaurants and QSR dining areas hang a menu or match-day display over the counter; retail floors drop a screen into the middle of an aisle; clinics and waiting rooms put information above the seating rather than behind reception; and boardrooms with a central table use a ceiling drop so the screen sits above the far end of the table instead of on a distant wall. The 695 to 1565 mm drop range means a specifier can standardise on one SKU across a portfolio of sites with wildly different slab heights, and the detachable VESA plate keeps each of those installs quick and safe. Think a 75-inch menu board above a busy service counter, or a 65-inch screen dropped over a central conference table.

Ideal for: restaurants and QSR outlets, retail floors, clinics and waiting areas, boardrooms, hotel lobbies and campus common rooms across Dubai, Abu Dhabi, Sharjah and the GCC.