VSYS VCM-CE1546BL Back-to-Back Dual Screen Ceiling Mount for 43"–86" Displays, 50 kg per Screen

The VSYS VCM-CE1546BL Back-to-Back Dual Screen Ceiling Mount for 43"–86" Displays, 50 kg per Screen is the ideal solution when you need to reach two audiences moving in opposite directions from a single overhead fixing point. Rather than cutting two ceiling penetrations and running two separate cable paths, you hang one telescopic pole and clamp a display to each face of it, so people approaching from either side always have a screen aimed at them. Each side accepts a 43-inch to 86-inch panel weighing up to 50 kg, and each side is aimed independently: a full 360 degree rotation around the shared pole, tilt from +5 to -20 degrees, and plus or minus 3 degrees of fine levelling once the panels are hanging. The pole telescopes between 1090 mm and 1690 mm and the ceiling plate itself tilts, so pitched roofs and double-height ceilings stop being a reason to redraw the design. It is heavy-duty engineering that stays visually out of the way — all function, no clutter.

Key Features

• Back-to-Back Dual Screen Design - Two displays face opposite directions from one shared pole, so a single ceiling fixing serves both sightlines.
• 50 kg Per Screen Rating - Each side carries up to 50 kg (110 lbs) independently, which covers most commercial panels in the 43-inch to 86-inch class.
• Telescopic Pole, 1090–1690 mm - A 600 mm adjustment window lets one part number suit showroom ceilings and high concourses alike.
• Tiltable Ceiling Plate - Fixes securely to flat slabs and to pitched roof structures without needing a separate adapter bracket.
• 360 Degree Rotation - Spin either screen around the pole to re-aim it after a floor plan or fixture change, with no re-drilling.
• Tilt +5 to -20 Degrees - Angles high-mounted screens down toward standing eye level so on-screen text stays readable from the floor.
• Plus or Minus 3 Degree Levelling - Squares each panel up precisely after the hang, so the two faces look deliberate rather than approximate.
• Wide VESA Coverage - Takes patterns from 200x200 mm up to 600x400 mm per screen, with a maximum hole spread of 610x402 mm.
• Detachable Display Panels - Brackets lift away from the pole for a safer two-person hang and quicker screen swaps during maintenance.
• Integrated Cable Management - Power and signal runs are concealed inside the pole, keeping an exposed-ceiling installation clean.
• Cold-Rolled Steel Build - 1.5 to 2.5 mm steel with a powder-coated black finish, strength tested 4x before it leaves the line.

In practice the back-to-back dual screen layout earns its keep wherever traffic flows in two directions and wall space has run out. Retail aisles, airport concourses, exhibition halls, hospital corridors and open-plan offices with walkways on both sides all suit a centre-hung pair far better than two wall mounts on opposite walls. The telescopic pole and tiltable ceiling plate matter most in buildings that were never designed around AV — atrium voids, sloped roof structures and mezzanine edges, where the final drop height gets decided on site rather than on the drawing. And because one model spans 43-inch to 86-inch screens at up to 50 kg per screen, a multi-site rollout can standardise on a single part number, whether that is a wayfinding pair above a mall walkway or a twin-facing menu display in a busy food court.

Ideal for: retail malls, airports and transport hubs, exhibition venues, hospitality and food service, corporate lobbies and education campuses across Dubai, Abu Dhabi, Sharjah and the GCC.